Don't Miss It! June Is A Good Time To Apply Glass Glue!

June is the peak season for summer decoration, and many homeowners hope to complete their decoration projects during this period in order to move into their new homes as soon as possible. Applying glass glue is an important step in the decoration process. Construction in June can effectively coordinate with the overall decoration progress, without delaying subsequent construction processes such as installing doors, windows, cabinets, etc. due to the long curing time of the glue.

After the construction in June, there is enough time for the glass glue to fully cure. After curing is completed, construction personnel can promptly inspect and repair the construction quality to ensure the sealing effect and aesthetics of the glass adhesive. If problems are found, they can also be dealt with in a timely manner before the decoration project is fully completed.

June is a good time to apply glass glue "has certain scientific basis, mainly reflected in the influence of environmental factors such as temperature, humidity, and ventilation on the construction and curing effect of glass glue:

PART 01

Suitable temperature conditions

• Beneficial for curing: Glass glue is a room temperature curing adhesive that is greatly affected by the environment. June is in summer, with high temperatures ranging from 15 ℃ to 35 ℃. The higher the temperature, the faster the chemical components in the glass adhesive react, and the shorter the curing time.

Glass glue, which originally required 24 hours or even longer to initially cure in low-temperature environments, may only take 12-18 hours to cure in June, greatly shortening the construction period and improving construction efficiency.

Reduce the risk of poor curing: Low temperature can slow down the curing speed of glass glue, and even lead to incomplete curing, resulting in a decrease in sealing performance. The temperature in June can avoid this problem, ensure the quality of glass glue curing, and provide reliable guarantee for subsequent use.

Excessive temperature (over 35 degrees Celsius) may cause the surface of the adhesive to harden rapidly while the interior is not fully cured. In such extreme weather conditions, special attention should be paid to observing and detecting the drying state of the adhesive.

PART 02

Controllable humidity environment

• Avoid moisture interference: Although the air humidity in June is relatively high, it is generally within the acceptable humidity range for glass glue construction (usually not exceeding 80% humidity).

Under such humidity conditions, the evaporation of water and chemical curing reactions in the glass adhesive can proceed in a relatively balanced manner, without adverse phenomena such as colloid whitening and foaming due to excessive humidity.

Ensure bonding effect: Appropriate humidity helps to form a good bonding force between the glass adhesive and the bonded surface. The humidity will not be too high, causing moisture to accumulate at the bonding interface and affecting the bonding strength; It will not be too low, causing the colloid to dry too quickly and unable to fully infiltrate the bonded surface.

However, in environments with humidity exceeding 70%, the drying time of glass glue may be extended to 48 hours or even longer. In the high humidity summer, ensuring good ventilation in the working environment can help shorten the drying time.

PART 03

Good ventilation conditions

●Accelerate odor emission: Glass glue will release a certain odor during construction, and the ventilation conditions in June are better, which can accelerate the emission of odor. After construction, opening doors and windows to allow fresh air to circulate quickly can effectively reduce the concentration of harmful gases indoors, minimize the impact on the health of construction workers and residents, and meet the requirements of environmentally friendly construction.

Promote colloid drying: Good ventilation can accelerate the evaporation of water on the surface of glass glue, promote colloid drying, and further shorten the curing time. Moreover, ventilation can remove dust and impurities generated during the construction process, maintain a clean construction environment, and improve construction quality.

Friends who have glass glue maintenance needs at home, June is a good time to apply glue! Everyone can seize this good time to maintain the glass glue on doors, windows, countertops, and other areas, making the home more sealed and beautiful.